Differences

This shows you the differences between two versions of the page.

--- deyecodes [2026/05/14 23:01] – jwan
+++ deyecodes [2026/07/22 17:32] (current) – [Grid and AC Data] jwan
@@ Line 26: / Line 26: @@
 ====== Battery Data ======
 <code>
+      Battery Charge (Daily)		kWh	0.1
+      Battery Discharge (Daily)	kWh	0.1
 	Battery Temperature		°C	0.1 (Offset 1000)
 	Battery Voltage			V	0.01
 	Battery SOC			%	1
+     Battery Status                          0=charge 1=standby 2=discharge
 	Battery Power			W	1 (Signed)
 	Battery Current			A	0.1 (Signed)
 	Battery Daily Charge		kWh	0.1
 	Battery Daily Discharge		kWh	0.1
-	Battery Total ChargekWh	0.1
+	Battery Total Charge		kWh	0.1
 	(Lifetime)
 	Battery Total Discharge		kWh	0.1
@@ Line 44: / Line 47: @@
 ====== Grid and AC Data ======
 <code>
-	Grid Voltage			V	0.1
+      Grid Frequency                  Hz	0.01
-	Grid Frequency			Hz	0.01
+     Grid Voltage L1                 V       0.1
+     Grid Voltage L2                 V       0.1
+     Load Voltage                    V       0.1
+	Grid Current L1			A	0.1
+	Grid Current L2			A	0.1
 	GRID Power (Total)		W	1 (Signed)
 	Grid L1 Power (Internal CT)	W	1 (Signed)
-	External CT / Check Meter Power	W	1 (Signed)
+     Grid L2 Power (Internal CT)     W       1 (Signed)
+	External CT / Check Meter Power	W	1 (Signed)  <- Grid Import
+     Grid L1 Power (External CT)     W       1 (Signed)
+     Grid L2 Power (External CT)     W       1 (Signed)
 	Inverter Power (AC Output)	W	1 (Signed)
+     Load L1 Power                   W       1 (Signed)
+     Load L2 Power                   W       1 (Signed)
 	Load Power (Essential)		W	1
 	Total Load Power		kWh	0.1
@@ Line 69: / Line 81: @@
 </code>
-====== Battery Data ======
+====== Misc Data ======
 <code>
+	Modbus Protocol Version			Decimal
+	Control Software Version (Firmware)	Decimal
+	Communication Board Version		Decimal
+	Rated Power (e.g., 6000 for 6kW)	Watts
 </code>
-====== Battery Data ======
+Note:
+To compute for the temperature, subtract value by 1000 then divide by 10
+https://community.home-assistant.io/t/connecting-to-the-new-deye-logger-to-home-assistant-using-esphome/997672
 <code>
+Production
+Sensor	Unit	Register
+Total Production	kWh	0x0060
+Daily Production	kWh	0x006C
+PV
+Sensor	Unit	Register
+PV1 Voltage	V	0x006D
+PV1 Current	A	0x006E
+PV1 Power	W	computed (V × I)
+PV2 Voltage	V	0x006F
+PV2 Current	A	0x0070
+PV2 Power	W	computed (V × I)
+Total PV Power	W	computed (PV1 + PV2)
+Max Solar Power	W	0x0035
+Grid
+Sensor	Unit	Register
+Grid Voltage 1	V	0x0096
+Grid Voltage 2	V	0x0097
+Grid Power	W	0x00A9
+Load
+Sensor	Unit	Register
+Daily Load Consumption	kWh	0x0054
+Total Load Consumption	kWh	0x0055
+Load L1 Voltage	V	0x009D
+Load L1 Current	A	0x00A4
+Load L1 Power	W	0x00B2
+Total Load Power	W	0x00B0
+Inverter
+Sensor	Unit	Register
+Total Power	W	0x00AD
+Inverter L1 Power	W	0x00AF
+DC Temperature	°C	0x005A
+AC Temperature	°C	0x005B
+Battery
+Sensor	Unit	Register
+Battery Voltage	V	0x00B7
+Battery Current	A	0x00BF
+Battery Power	W	0x00BE
+Battery SOC	%	0x00B8
+Battery Settings (diagnostic)
+Sensor	Unit	Register
+Battery Capacity	Ah	0x00CC
+Battery Empty Voltage	V	0x00CD
+Max Charge Current	A	0x00D2
+Max Discharge Current	A	0x00D3
+Battery Shutdown %	%	0x00D9
+Battery Restart %	%	0x00DA
+Battery Low %	%	0x00DB
+Selling Mode (diagnostic)
+Sensor	Unit	Register
+Selling Mode Time 1–6	HH:MM	0x00FA–0x00FF
+Selling Mode Power 1–6	W	0x0100–0x0105
+Selling Mode SOC 1–6	%	0x010C–0x0111
+Selling Mode Charge Flag 1–6	—	0x0112–0x0117
 </code>
+[[deyecodedefinition|Deye Code Definition (from Solarman)]]