From Proxmox GUI:
  - expand node
  - choose the "local" drive
  - choose CT TEMPLATE
  - click TEMPLATES
  - select the latest DEBIAN (ie: debian 13 standard) and download
  - still in "local" drive, click CREATE CT
  - put a hostname (ie: samba-lxc)
  - put password
  - under TEMPLATE, choose the DEBIAN that was downloaded
  - under DISKS, select "local-lvm" as storage drive
  - give disk size (if possible 10GB or more)
  - under CPU, give 1 cores
  - under MEMORY give 256 / 256
  - under NETWORK, select DHCP or specify STATIC IP

Once the container show up, select it and change features (under OPTIONS):
  * Nesting: checked
  * START AT BOOT: checked

Start the container

Once started, do the following from console:
<code>
apt update
apt install samba -y
</code>

** after install, no shared setup yet, have to do **nano /etc/samba/smb.conf**

Enable SSH:
<code>
# 1. Ensure the SSH server is installed
apt update && apt install openssh-server -y
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
systemctl restart ssh
</code>

The DHCP IP address, check the IP from the NETWORK of the node