JWan Wiki

This is an old revision of the document!

---

From Proxmox GUI:

1. expand node
2. choose the “local” drive
3. choose CT TEMPLATE
4. click TEMPLATES
5. select the latest DEBIAN (ie: debian 13 standard) and download
6. still in “local” drive, click CREATE CT
7. put a hostname (ie: docker-lxc)
8. put password
9. under TEMPLATE, choose the DEBIAN that was downloaded
10. under DISKS, select “local-lvm” as storage drive
11. give disk size (if possible 20GB or more)
12. under CPU, give 2 cores
13. under MEMORY give 2048 / 512
14. under NETWORK, select DHCP or specify STATIC IP

Once the container show up, select it and change features (under OPTIONS):

• Nesting: checked
• KEYCTL: checked
• START AT BOOT: checked

Start the container

Once started, do the following from console:

apt update
apt install curl -y
curl -fsSL https://get.docker.com | sh

Enable SSH:

# 1. Ensure the SSH server is installed
apt update && apt install openssh-server -y
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
systemctl restart ssh

The DHCP IP address, check the IP from the NETWORK of the node